IDEX部件编号: FL-433416
For optimal filter set performance, pair this exciter with AF01-551/22 and AF567-Di01, which have been optimized for Cy5, Alexa Fluor 546, ATTO 550 and other key fluorophores when used as a filter set. Precise edge placement of the steep spectral edges combined with deep complementary blocking maximize fluorophore performance compared to standard exciter and emitter pairs.
比较产品
| Optical Specifications | Value |
|---|---|
| Transmission Band 1 |
Tavg > 93% 571 – 613 nm |
| Blocking Band 1 |
ODavg > 5 200 – 275 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 6 |
ODavg > 2 850 – 1100 nm |
| Blocking Band 5 |
ODavg > 6 627 – 850 nm |
| Blocking Band 3 |
ODavg > 10 528 – 562 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 2 |
ODavg > 6 275 – 528 nm |
| Blocking Band 4 |
OD > 3.5 566.5 nm |
| Center Wavelength 1 |
592 nm |
| Guaranteed Minimum Bandwidth 1 |
42 nm |
| General Filter Specifications | Value |
| Angle of Incidence |
0 ± 5 degrees |
| Cone Half-angle |
7 degrees |
| Optical Damage Rating |
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs. |
| Physical Filter Specifications | Value |
| Transverse Dimensions (diameter) |
25 mm |
| Transverse Tolerance |
+ 0.0 / – 0.1 mm |
| Filter Thickness (unmounted) |
2.0 mm |
| Filter Thickness Tolerance (unmounted) |
± 0.1 mm |
| Filter Thickness Tolerance (mounted) |
± 0.1 mm |
| Filter Thickness (mounted) |
3.5 mm |
| Scratch-Dig |
60-40 |
| Orientation |
Arrow on ring is preferred direction of propagation of light |
| FWHM 1 (nominal) |
45.9 nm |
FL-421008
